Aluminum ceiling light / IK10

Aluminum ceiling light / IK10

Short Description:

1. 9w, 12w, 18w, 24w. φ295×83

2. Samsung 5630 led >95lm/w

3.3000 -6500K CRI: Ra>80

4.die casting aluminum +white PC diffuser:

5.Lifespan: >50,000hrs

6.Available function: Sensor, Emergency

It is our IP65, IK10, bulkhead ideal for a range of interior and exterior applications. The housing is fully manufactured here in China using high-quality polycarbonate and die-cast aluminum.

Product Detail

Product Tags

Short Description

9w, 12w, 18w, 24w.  φ295x83

Samsung 5630 led  >95lm/w

3000 -6500K  CRI: Ra>80

die casting aluminum +white PC diffuser

Lifespan: >50,000hrs

Available function: Sensor, Emergency


Installation Or Assembly Instructions

Please Read These Installation Instructions Carefully Before Installing Or Maintaining This

Equipment. These Instructions And Local Regulations(where Applicable), By An Authorised And Licenced Electrician.

Important – The Product Must Be Maintained And Operated In Accordance With The Manufacture’s Instructions, Failure To Do So May Damage The Product And Services. It Is Strongly Recommended That This Important Note Be Communicated To The Owner And Or Operator Of The Installation At The Time Of Site Commissioning. Good Practice Does Not Recommend The 24/7 Use Of Products Without The Application Of Suitable Switch Cycle Intervals. P&q Is Not Responsible For Any Product Not Maintained In Accordance With

The Recommended Procedures. All Products Should Be Thoroughly Cleaned On A Regular Basis To Ensure The Optical Performance, Together With The Electrical,mechanical And Structural Integrity As Designed, Is Maintained Throughout The Service Life Of The Product.

“consult A Qualified Electrician To Ensure Correct Branch Circuit Conductor”

Electrical Fault Finding And Relacement

The Supply Must Be Isolated Before Opening The Luminaire. If All Connections Are Verified To Be Correct, The Products Environment May Be Having An Adverse Effect To The Components. If This Is The Case Please Contact Your Supplier For A More Suitable Replacement. Any Fault Finding Must Be Done By A Fully Qualified Electrician And, If Carried Out With The Luminaire In Place, Under A Permit To Work. With Replacement Of Any Part Ensure That Wires And Connections Are Checked, And Any Wire Sleeving Refitted.

Product pictures

  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories