China 8 Year Exporter Die Casting Engineering - LED Street Light-PQSL003 – P&Q Lighting manufacturers and suppliers

8 Year Exporter Die Casting Engineering - LED Street Light-PQSL003 – P&Q Lighting

Short Description:

Product Detail

Product Tags

Feedback (2)

High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we're hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for Plastic Injection Moulding Die Makers, Hot And Cold Chamber Die Casting, Zinc Alloy Die Casting, We are going to empower people by communicating and listening, Setting an example to others and learning from experience.

8 Year Exporter Die Casting Engineering - LED Street Light-PQSL003 – P&Q Lighting Detail:

This is the description of LED Street Light-PQSL003

golf 3

LED Street Lights

golf 2

LED Street Lights

● Unique Design Using Modular Led Source Kit With High Efficiency Led Chips

● Range Of Lumen Packages And Light Distributions

● Integral Driver With Automatic Temperature Controller To Prevent Over Heating In High Ambient Environments

● Low Profile Design Reduces Wind Resistance And Maximises Heat Dissipation For Optimum Performance

● Die-Cast, Low Copper Aluminium Housing With Polyester Powdercoat Finish, Resistant To Corrosion And Saline Environments

● Unique Mounting Bracket Can Be Positioned For Post Or Arm With Dia. 48-60mm

● Installation Features Include Safety Cut-Off Switch, Ip66 Rapid Electrical Connector, Class Ii Electrical Classification Only.

● Control Options, Dimming, Midnight Function Available.

1. Aluminium Gear Box Cover ×1

2. Aluminium Body ×1

3. Aluminium Gear Box Cover Plate×1

4. Variable-Angle Mounting Bracket ×1

5. Reflector ×1

6. Silicone Rubber Gasket ×1

7. Tempered Glass ×1

8. Body Cover ×1 9. Lens ×1

CE	BCTC-2011009558-SZJR BCTC-2011009559-SZJR
IP65	BCTC-2011009792-SZJR

Version	Dim (Mm)	Mass (Kg)
80W LED	634×263×102	5.7
150W LED	762×322×107	8.2

Installation Or Assembly Instructions
Please Read These Installation Instructions Carefully Before Installing Or Maintaining This
Equipment. These Instructions And Local Regulations(Where Applicable), By An Authorised And Licenced Electrician. Important – The Product Must Be Maintained And Operated In Accordance With The Manufacture’s instructions, Failure To Do So May Damage The Product And Services. It Is Strongly Recommended That This Important Note Be Communicated To The Owner And Or Operator Of The Installation At The Time Of Site Commissioning. Good Practice Does Not Recommend The 24/7 Use Of Products Without The Application Of Suitable Switch Cycle Intervals. P&Q Is Not Responsible For Any Product Not Maintained In Accordance With The Recommended Procedures. All Products Should Be Thoroughly Cleaned On A Regular Basis To Ensure The Optical Performance, Together With The Electrical,Mechanical And Structural Integrity As Designed, Is Maintained Throughout The Service Life Of The Product.
“Consult A Qualified Electrician To Ensure Correct Branch Circuit Conductor”

	GOLF Ⅰ	GOLF Ⅱ
Ip Rating	Ip65	Ip65
Nominal Voltage	Ac180-240v	Ac180-240v
Line Current	2.65A	4.2A

Prior To Installation Products Are To Be Stored In Cool And Dry Conditions.

LED Street light installation-01

1. Foam Filled Cover

2. Foam Filled Bottom

3. Golf Ⅰ: 680×300×140mm Carton
Golf Ⅱ: 795×355×140mm Carton

Product detail pictures:

Related Product Guide:

We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients for 8 Year Exporter Die Casting Engineering - LED Street Light-PQSL003 – P&Q Lighting , The product will supply to all over the world, such as: Finland, Hanover, Guinea, We will supply much better products with diversified designs and professional services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.

High Pressure Die Casting